8x2 Disc Magnet, Neodymium

STEP · STL Supports CommunityCAD0 downloads
8x2 Disc Magnet, Neodymium
1 / 5

8x2 Disc Magnet, Neodymium

8 mm across and 2 mm high, the 8x2 disc magnet (Neodymium disc magnet) is nickel-plated and magnetised through the height. Here as simplified STEP files.

8x2 disc magnet, Neodymium disc magnet

How these parts are made, and what the levels mean: read the method

  • Also known as: 8x2 round magnet, 8x2 rare earth magnet, 8x2 button magnet, 8x2 neodymium magnet
  • Model id: magnets-disc-8x2
  • Standard: Neodymium disc magnet · size 8x2

Files

Part keySimplified
magnets-disc-8x2STEP

Dimensions

Dimension symbols for 8x2 disc magnets (Neodymium disc magnet)

SymbolNameminnommaxModeledRuleLevel
DDiameter88nominalL1
HHeight22nominalL1

Drawing

Drawing of the 8x2 disc magnet with its values (Neodymium disc magnet)

As a PDF: CC-MAGDISC-SZ-8x2.pdf.

What each maker states

  • supermagnete lists this size in N45.
  • first4magnets lists this size in N42.
  • The shape is the same in any grade.

The 8x2 disc magnet beside the 8x1 and the 8x4

The 8x2 is number 22 of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.

  • Diameter (D): 8 mm on the 8x2 disc magnet, the same on the 8x1 and the 8x4.
  • Height (H): 2 mm on the 8x2 disc magnet, against 1 mm on the 8x1 and 4 mm on the 8x4.

Other sizes

Conventions

  • Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
  • Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
  • Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.

Documents

Sources

first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MAGDISC-DS-8x2.pdf

'?) CommunityCAD CC-MAGDISC-DS-8x2 revA Size datasheet - 8x2 8 x 2 mm neodymium disc magnet Size datasheet: this size's values with their levels, conventions and sources. For Nickel-plated, magnetised through the height, any grade Ld ao rerce aon te Files 1 STEP AP214 (simplified) 8x2, pole face,…

View full datasheet →

docs/CC-MAGDISC-SZ-8x2.pdf

Neodymium disc magnet, diameter x height, 8x2 Size drawing - 8x2 values on the views - enlarged 8:1 L : @D=8 Dimension Diameter Height, magnetised axis Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.…

View full datasheet →