12x6 Disc Magnet, Neodymium
The 12x6 disc magnet (Neodymium disc magnet) is 12 mm across and 6 mm high, nickel-plated and magnetised through the height. It comes as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 12x6 round magnet, 12x6 rare earth magnet, 12x6 button magnet, 12x6 neodymium magnet
- Model id:
magnets-disc-12x6
- Standard: Neodymium disc magnet · size 12x6
Files
| Part key | Simplified |
|---|
magnets-disc-12x6 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| D | Diameter | | 12 | | 12 | nominal | L1 |
| H | Height | | 6 | | 6 | nominal | L1 |
Drawing

As a PDF: CC-MAGDISC-SZ-12x6.pdf.
What each maker states
- supermagnete lists this size in 50M, N45.
- first4magnets lists this size in N42.
- The shape is the same in any grade.
The 12x6 disc magnet beside the 12x4 and the 15x2
The 12x6 is number 39 of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.
- Diameter (D): 12 mm on the 12x6 disc magnet, against 12 mm on the 12x4 and 15 mm on the 15x2.
- Height (H): 6 mm on the 12x6 disc magnet, against 4 mm on the 12x4 and 2 mm on the 15x2.
Other sizes
- One size smaller: 12x4 Disc Magnet, Neodymium, 12 mm across, 4 mm high, nickel-plated, axially magnetised.
- One size larger: 15x2 Disc Magnet, Neodymium, 15 mm across, 2 mm high, nickel-plated, axially magnetised.
Conventions
- Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
- Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
- Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.
Documents
Sources
first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...