MR84-2RS Miniature Ball Bearing, Sealed
The MR84-2RS miniature ball bearing (MR series, sealed) has a 4 mm bore, an 8 mm outside diameter and a width of 3 mm. Get it as simplified STEP files. Width as the shielded bearing; sealed row not listed by the sources.

How these parts are made, and what the levels mean: read the method
- Also known as: MR84-2RS MR bearing, MR84-2RS miniature deep groove ball bearing, MR84-2RS small ball bearing
- Model id:
bearings-miniature-mr84-2rs
- Standard: MR series · size MR84
Files
| Part key | Simplified |
|---|
bearings-miniature-mr84-2rs | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 4 | | 4 | nominal | L1 |
| D | Outside diameter | | 8 | | 8 | nominal | L1 |
| B | Width | | 3 | | 3 | nominal | L1 |
| r | Chamfer dimension | 0.1 | | | 0.1 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-BRG-MINI-SZ-MR84.pdf.
The MR84-2RS miniature ball bearing beside the MR74-2RS and the MR104-2RS
The MR84-2RS is number 3, counting from the smallest, of the 13 MR series miniature ball bearings published here, from MR63-2RS to MR148-2RS.
- Bore diameter (d): 4 mm on the MR84-2RS miniature ball bearing, the same on the MR74-2RS and the MR104-2RS.
- Outside diameter (D): 8 mm on the MR84-2RS miniature ball bearing, against 7 mm on the MR74-2RS and 10 mm on the MR104-2RS.
- Width (B): 3 mm on the MR84-2RS miniature ball bearing, against 2.5 mm on the MR74-2RS and 4 mm on the MR104-2RS.
- Chamfer dimension (r): at least 0.1 mm on the MR84-2RS miniature ball bearing, against at least 0.08 mm on the MR74-2RS and at least 0.15 mm on the MR104-2RS.
The MR84-2RS miniature ball bearing in its other versions
Other sizes
Conventions
- Simplified only: rings, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, one face at Z = 0.
- No markings; tolerance class, clearance and lubricant are not geometry.
- Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.
Documents
Sources
nmb-miniature, nsk-miniature. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...