3.175 mm Steel Ball, ISO 3290-1

STL Supports CommunityCAD0 downloads
3.175 mm Steel Ball, ISO 3290-1
1 / 3

3.175 mm Steel Ball, ISO 3290-1

The 3.175 mm steel ball (ISO 3290-1): nominal ball diameter 3.175 mm, corresponding inch size 0.125 mm. Available as simplified STEP files.

3.175 mm steel ball, ISO 3290-1

How these parts are made, and what the levels mean: read the method

  • Also known as: 3.175 mm bearing ball, 3.175 mm precision steel ball, 3.175 mm chrome steel ball
  • Model id: iso3290-d3-175
  • Standard: ISO 3290-1:2014 · size 3.175 mm

Files

Part keySimplified
iso3290-d3-175STEP

Dimensions

Dimension symbols for 3.175 mm steel balls (ISO 3290-1)

SymbolNameminnommaxModeledRuleLevel
DwNominal ball diameter3.1753.175nominalL1
Dw_inchCorresponding inch size0.1250.125nominalL1

Drawing

Drawing of the 3.175 mm steel ball with its values (ISO 3290-1)

As a PDF: CC-ISO3290-SZ-3.175.pdf.

The 3.175 mm steel ball beside the 3 mm and the 3.5 mm

The 3.175 mm is number 6, counting from the smallest, of the 28 ISO 3290-1 steel balls published here, from 2 mm to 8 mm.

  • Nominal ball diameter (Dw): 3.175 mm on the 3.175 mm steel ball, against 3 mm on the 3 mm and 3.5 mm on the 3.5 mm.

Other sizes

Conventions

  • Simplified only: a ball has no thread, so there is one detail level. STEP AP214, millimetres, Z up, the ball's centre at the origin.
  • A sphere at the nominal ball diameter Dw of ISO 3290-1 Table 1; its centre is the origin.
  • One model for every grade: grade, gauge, form error and roughness are ordered with the ball, not modeled.

Documents

Sources

ceramicspeed-balls-datasheet, iso3290-1-2014-sample, mba-balls-catalogue. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO3290-DS-3.175.pdf

* CC-1S803290-DS-3.175 revA '?) CommunityCAD Size datasheet - 3.175 ISO 3290-1 3.175 mm steel ball (1/8 in) Size datasheet: this ball's value with its level, conventions and sources. One model for every grade; the grade is chosen when ordering. Ball 3.175 mm (1/8 in) diameter Part key…

View full datasheet →

docs/CC-ISO3290-SZ-3.175.pdf

ISO 3290-1 steel balls for rolling bearings, @3.175 Size drawing - @3.175 values on the views - inch size 1/8 in (reference) - enlarged 50:1 3.175 1/8 Source levels Main value = the modeled value (nominal, else the middle of min-max). @ Dw = 3.175 Grey under a value = its min-max, where the source…

View full datasheet →