HK1212 Needle Bearing, ISO 3245
For a 12 mm shaft and an 18 mm housing bore, the HK1212 needle bearing (ISO 3245) is 12 mm wide. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: HK1212 drawn cup needle roller bearing, HK1212 needle roller bearing, HK1212 drawn cup bearing
- Model id:
iso3245-hk1212
- Standard: ISO 3245 · size HK1212
Files
| Part key | Simplified |
|---|
iso3245-hk1212 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| Fw | Bore diameter under the rollers | | 12 | | 12 | nominal | L1 |
| D | Outside diameter | | 18 | | 18 | nominal | L1 |
| C | Width | | 12 | | 12 | nominal | L1 |
| r | Chamfer dimension | 0.8 | | | 0.8 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-ISO3245-SZ-HK1212.pdf.
The HK1212 needle bearing beside the HK1210 and the HK1312
The HK1212 is number 16 of the 37 ISO 3245 needle bearings published here, listed from HK0306 to HK2526.
- Bore diameter under the rollers (Fw): 12 mm on the HK1212 needle bearing, against 12 mm on the HK1210 and 13 mm on the HK1312.
- Outside diameter (D): 18 mm on the HK1212 needle bearing, against 16 mm on the HK1210 and 19 mm on the HK1312.
- Width (C): 12 mm on the HK1212 needle bearing, against 10 mm on the HK1210 and 12 mm on the HK1312.
- Chamfer dimension (r): at least 0.8 mm on the HK1212 needle bearing, against at least 0.4 mm on the HK1210 and at least 0.8 mm on the HK1312.
Other sizes
Conventions
- Simplified only: an illustrative drawn cup and needle rollers, no cage. STEP AP214, millimetres, Z along the axis, one face at Z = 0.
- Illustrative needle rollers, no cage: diameter (D - Fw)/2 less the wall, touching Fw, as many as fit at a pitch of 1.25 roller diameters.
- No markings; tolerances, radial clearance and lubricant are not geometry.
Documents
Sources
koyo-bs007-hk, ntn-bearingfinder-hk, schaeffler-hr1-hk, skf-17000-hk. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...