6x9 Sintered Bronze Bushing, ISO 2795
The 6x9 sintered bronze bushing (ISO 2795) has a 6 mm bore and a 9 mm outside diameter, oil impregnated and press-fitted. Get it as 3 lengths from 4 to 10 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method
- Also known as: 6x9 oilite bushing, 6x9 sleeve bearing, 6x9 plain bearing, 6x9 self-lubricating bush, 6x9 x 4 to 6x9 x 10
- Model id:
iso2795-c-6x9
- Standard: ISO 2795:2020 · size 6x9
Lengths
| Length (mm) | Part key | Simplified |
|---|
| 4 | iso2795-c-6x9x4 | STEP |
| 6 | iso2795-c-6x9x6 | STEP |
| 10 | iso2795-c-6x9x10 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Inside diameter | | 6 | | 6 | nominal | L2 |
| D | Outside diameter | | 9 | | 9 | nominal | L2 |
| C | Chamfer, maximum | | | 0.3 | 0.3 | single limit (max), modeled at the limit | L2 |
| C_angle | Chamfer angle | | 45 | | 45 | nominal | L1 |
Drawing

As a PDF: CC-ISO2795-SZ-6x9.pdf.
The 6x9 sintered bronze bushing beside the 6x10 and the 7x11
The 6x9 is number 10 of the 20 ISO 2795 sintered bronze bushings published here, listed from 2x5 to 12x16.
- Inside diameter (d): 6 mm on the 6x9 sintered bronze bushing, against 6 mm on the 6x10 and 7 mm on the 7x11.
- Outside diameter (D): 9 mm on the 6x9 sintered bronze bushing, against 10 mm on the 6x10 and 11 mm on the 7x11.
- Chamfer, maximum (C): up to 0.3 mm on the 6x9 sintered bronze bushing, the same on the 6x10 and the 7x11.
- Chamfer angle (C_angle): 45° on the 6x9 sintered bronze bushing, the same on the 6x10 and the 7x11.
Other sizes
Conventions
- Simplified only: a bush has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis, one end face at Z = 0 and the other at Z = L.
- Nominal sizes: the sources give tolerance classes, not limits (before fitting G7/G8 bore, s7/s8 outside, js13 length; H7 or H8 bore after press-fitting), so the model is the nominal part before fitting, concentric.
- A chamfer C, at C_angle from the axis, on the bore and outside edges at both ends: Table 2's maximum for the wall (D - d)/2, modeled at the limit, within the owner's quarter-wall cap.
Documents
Sources
bowman-iso2795-plain, iso2795-2020-sample, iso2795-2020-sample-figures, selfoil-iso2795-plain. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...