MF95 Flanged Ball Bearing
For a 5 mm shaft and a 9 mm housing bore, the MF95 flanged ball bearing (F and MF series) is 2.5 mm wide. Modeled as simplified STEP files. Its flange is 10.2 mm across and 0.6 mm thick.

How these parts are made, and what the levels mean: read the method
- Also known as: MF95 flange bearing, MF95 MF bearing, MF95 F bearing, MF95 flanged miniature bearing
- Model id:
bearings-miniature-flanged-mf95
- Standard: F and MF series · size MF95
Files
| Part key | Simplified |
|---|
bearings-miniature-flanged-mf95 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 5 | | 5 | nominal | L1 |
| D | Outside diameter | | 9 | | 9 | nominal | L1 |
| B | Width | | 2.5 | | 2.5 | nominal | L1 |
| r | Chamfer dimension | 0.1 | | | 0.1 | single limit (min), modeled at the limit | L1 |
| D1 | Flange diameter | | 10.2 | | 10.2 | nominal | L1 |
| C1 | Flange width | | 0.6 | | 0.6 | nominal | L1 |
Drawing

As a PDF: CC-BRG-MINI-FL-SZ-MF95.pdf.
The MF95 flanged ball bearing beside the MF85 and the MF105
The MF95 is number 16 of the 39 F and MF series flanged ball bearings published here, listed from F682 to F689.
- Bore diameter (d): 5 mm on the MF95 flanged ball bearing, the same on the MF85 and the MF105.
- Outside diameter (D): 9 mm on the MF95 flanged ball bearing, against 8 mm on the MF85 and 10 mm on the MF105.
- Width (B): 2.5 mm on the MF95 flanged ball bearing, against 2 mm on the MF85 and 3 mm on the MF105.
- Chamfer dimension (r): at least 0.1 mm on the MF95 flanged ball bearing, against at least 0.08 mm on the MF85 and at least 0.1 mm on the MF105.
- Flange diameter (D1): 10.2 mm on the MF95 flanged ball bearing, against 9.2 mm on the MF85 and 11.2 mm on the MF105.
- Flange width (C1): 0.6 mm on the MF95 flanged ball bearing, the same on the MF85 and the MF105.
The MF95 flanged ball bearing in its other versions
Other sizes
Conventions
- Simplified only: rings, flange, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, the flange face at Z = 0.
- No markings; tolerance class, clearance and lubricant are not geometry.
- Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.
Documents
Sources
nmb-miniature-flanged, nsk-miniature-flanged. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...