MF128 Flanged Ball Bearing
For an 8 mm shaft and a 12 mm housing bore, the MF128 flanged ball bearing (F and MF series) is 2.5 mm wide. Modeled as simplified STEP files. Its flange is 13.2 mm across and 0.6 mm thick.

How these parts are made, and what the levels mean: read the method
- Also known as: MF128 flange bearing, MF128 MF bearing, MF128 F bearing, MF128 flanged miniature bearing
- Model id:
bearings-miniature-flanged-mf128
- Standard: F and MF series · size MF128
Files
| Part key | Simplified |
|---|
bearings-miniature-flanged-mf128 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 8 | | 8 | nominal | L1 |
| D | Outside diameter | | 12 | | 12 | nominal | L1 |
| B | Width | | 2.5 | | 2.5 | nominal | L1 |
| r | Chamfer dimension | 0.1 | | | 0.1 | single limit (min), modeled at the limit | L1 |
| D1 | Flange diameter | | 13.2 | | 13.2 | nominal | L1 |
| C1 | Flange width | | 0.6 | | 0.6 | nominal | L1 |
Drawing

As a PDF: CC-BRG-MINI-FL-SZ-MF128.pdf.
The MF128 flanged ball bearing beside the F627 and the MF148
The MF128 is number 34 of the 39 F and MF series flanged ball bearings published here, listed from F682 to F689.
- Bore diameter (d): 8 mm on the MF128 flanged ball bearing, against 7 mm on the F627 and 8 mm on the MF148.
- Outside diameter (D): 12 mm on the MF128 flanged ball bearing, against 22 mm on the F627 and 14 mm on the MF148.
- Width (B): 2.5 mm on the MF128 flanged ball bearing, against 7 mm on the F627 and 3.5 mm on the MF148.
- Chamfer dimension (r): at least 0.1 mm on the MF128 flanged ball bearing, against at least 0.3 mm on the F627 and at least 0.15 mm on the MF148.
- Flange diameter (D1): 13.2 mm on the MF128 flanged ball bearing, against 25 mm on the F627 and 15.6 mm on the MF148.
- Flange width (C1): 0.6 mm on the MF128 flanged ball bearing, against 1.5 mm on the F627 and 0.8 mm on the MF148.
The MF128 flanged ball bearing in its other versions
Other sizes
Conventions
- Simplified only: rings, flange, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, the flange face at Z = 0.
- No markings; tolerance class, clearance and lubricant are not geometry.
- Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.
Documents
Sources
nmb-miniature-flanged, nsk-miniature-flanged. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...