M8 Small Flat Washer, ISO 7092
Made for M8 screws, this small flat washer (ISO 7092) has an 8.4 mm hole and is 15 mm across, 1.6 mm thick. Download it as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: M8 small plain washer, M8 narrow washer
- Model id:
iso7092-m8
- Standard: ISO 7092:2000 · size M8
Files
| Part key | Simplified |
|---|
iso7092-m8 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d1 | Inside diameter | 8.4 | 8.4 | 8.62 | 8.4 | nominal | L2 |
| d2 | Outside diameter | 14.57 | 15 | 15 | 15 | nominal | L2 |
| h | Thickness | 1.4 | 1.6 | 1.8 | 1.6 | nominal | L2 |
Drawing

As a PDF: CC-ISO7092-SZ-M8.pdf.
Goes with the M8 small flat washer
The M8 small flat washer beside the M6
The M8 is the largest of the 7 ISO 7092 small flat washers published here, from M2 to M8.
- Inside diameter (d1): 8.4 mm on the M8 small flat washer, against 6.4 mm on the M6.
- Outside diameter (d2): 15 mm on the M8 small flat washer, against 11 mm on the M6.
- Thickness (h): 1.6 mm on the M8 small flat washer, the same on the M6.
Other sizes
Conventions
- Simplified only: a washer has no thread, so there is one detail level. STEP AP214, millimetres, Z up, one face at Z = 0.
- Hole d1 and outside d2 at their nominals, which the standard puts at d1 min and d2 max; thickness h at its nominal.
Documents
Sources
amesweb-iso7092, fasten-it-iso7092, fasteners-eu-iso7092, iso7092-2000-sample. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...