M4 Dog Point Set Screw, ISO 4028

STL Supports CommunityCAD0 downloads
M4 Dog Point Set Screw, ISO 4028
1 / 5

M4 Dog Point Set Screw, ISO 4028

With no head, the M4 dog point set screw (ISO 4028) sits flush or below the surface, turned with a 2 mm hex key. It comes in 7 lengths from 5 to 20 mm, each as simplified and threaded STEP.

M4 × 10 dog point set screw, ISO 4028

How these parts are made, and what the levels mean: read the method

  • Also known as: M4 dog point grub screw, M4 grub screw, M4 socket set screw, M4 x 5 to M4 x 20
  • Model id: iso4028-m4
  • Standard: ISO 4028:2003 · thread M4 × 0.7, ISO metric coarse, right hand

Lengths

Length (mm)Part keySimplifiedThreaded
5iso4028-m4x5STEPSTEP
6iso4028-m4x6STEPSTEP
8iso4028-m4x8STEPSTEP
10iso4028-m4x10STEPSTEP
12iso4028-m4x12STEPSTEP
16iso4028-m4x16STEPSTEP
20iso4028-m4x20STEPSTEP

Dimensions

Dimension symbols for M4 dog point set screws (ISO 4028)

SymbolNameminnommaxModeledRuleLevel
PThread pitch0.70.7nominalL1
sSocket width across flats2.0222.082.05midpoint of min–maxL1
eSocket width across corners2.3032.303single limit (min), modeled at the limitL1
t_shortSocket depth, short screws1.51.5single limit (min), modeled at the limitL1
t_longSocket depth, long screws2.52.5single limit (min), modeled at the limitL1
dpPoint diameter, flat and dog point2.252.52.375midpoint of min–maxL1
dtTruncation diameter, cone point11single limit (max), modeled at the limitL1
dzCup diameter, cup point1.7521.875midpoint of min–maxL1
z_shortDog length, short dog point11.251.125midpoint of min–maxL1
z_longDog length, long dog point22.252.125midpoint of min–maxL1
fl_angleFlat point chamfer angle5050single limit (max), modeled at the limitL2
cone_angleCone point included angle, long lengths9090nominalL2
cone_angle_shortCone point included angle, short lengths120120nominalL1
dog_angleDog point chamfer angle5050single limit (max), modeled at the limitL2
cp_angleCup point outer chamfer angle5050single limit (max), modeled at the limitL2
cup_angleCup recess included angle120 ref120reference valueL2
PCoarse thread pitch0.70.7nominalL1
tap_drillTap drill diameter3.33.3nominalL1
d1Basic minor diameter3.24222763.2422276nominalL1
ch_angleChamfered end angle5050single limit (max), modeled at the limitL2
dh_fineClearance hole, fine series4.34.3nominalL1
dh_mediumClearance hole, medium series4.54.5nominalL1
dh_coarseClearance hole, coarse series4.84.8nominalL1

Thread and holes

  • Tap drill: 3.3 mm (method: d − P), L1, sources amesweb-tap-drill, rule-tap-drill.
  • Clearance hole (ISO 273): close 4.3, normal 4.5, loose 4.8 mm (L1: fine, medium and coarse series (albany-clearance, wikipedia-de-clearance)).

Drawing

Drawing of the M4 dog point set screw with its values (ISO 4028)

As a PDF: CC-ISO4028-SZ-M4.pdf.

Goes with the M4 dog point set screw

  • Hex key: 2 mm, the socket's nominal width across flats (s) in the table above.

The M4 dog point set screw beside the M3 and the M5

The M4 is number 4, counting from the smallest, of the 7 ISO 4028 dog point set screws published here, from M2 to M8.

  • Thread pitch (P): 0.7 mm on the M4 dog point set screw, against 0.5 mm on the M3 and 0.8 mm on the M5.
  • Socket width across flats (s): 2 mm on the M4 dog point set screw, against 1.5 mm on the M3 and 2.5 mm on the M5.
  • Socket width across corners (e): at least 2.303 mm on the M4 dog point set screw, against at least 1.733 mm on the M3 and at least 2.873 mm on the M5.
  • Socket depth, short screws (t_short): at least 1.5 mm on the M4 dog point set screw, against at least 1.2 mm on the M3 and at least 2 mm on the M5.
  • Socket depth, long screws (t_long): at least 2.5 mm on the M4 dog point set screw, against at least 2 mm on the M3 and at least 3 mm on the M5.
  • Point diameter, flat and dog point (dp): 2.25 to 2.5 mm on the M4 dog point set screw, against 1.75 to 2 mm on the M3 and 3.2 to 3.5 mm on the M5.
  • Truncation diameter, cone point (dt): up to 1 mm on the M4 dog point set screw, against up to 0.75 mm on the M3 and up to 1.25 mm on the M5.
  • Cup diameter, cup point (dz): 1.75 to 2 mm on the M4 dog point set screw, against 1.15 to 1.4 mm on the M3 and 2.25 to 2.5 mm on the M5.

Other sizes

Conventions

  • Simplified: plain body at the nominal diameter, light for assemblies. Threaded: the ISO 68-1 thread, for close-ups and renders.
  • Values given only as a limit are modeled at that limit; s at the middle of its band.
  • Socket end: ISO 4753 chamfered end (CH), end face at the thread root d1, chamfer at the angle limit to the axis.

Documents

Sources

accu-iso4027, albany-clearance, amesweb-iso4026-4029, amesweb-tap-drill, fasten-it-iso4026, fasten-it-iso4027, fasten-it-iso4028, fasten-it-iso4029, fuller-iso4026, fuller-iso4027, fuller-iso4028, fuller-iso4029, iso4753-2011-sample, iso4753-2011-sample-text, rule-basic-minor, rule-tap-drill, wikipedia-de-clearance, wikipedia-iso261. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO4028-DS-M4.pdf

CC-1S04028-DS-M4 revA Size datasheet - M4 '?) CommunityCAD ISO 4028 M4 hexagon socket set screw, dog point Size datasheet: this size's values with their levels, its lengths, conventions and sources. Thread M4 x 0.7, ISO metric coarse, right hand Lengths 7 generated, | = 5-20 Files 14 STEP AP214…

View full datasheet →

docs/CC-ISO4028-SZ-M4.pdf

ISO 4028 hexagon socket set screw, dog point, M4 Size drawing - M4 values on the views - | = 8 shown - enlarged 10:1 Sym. Dimensi Thread pitch d1 = 3.2422 View on the socket end 2.05 1 Socket across flats 2.02-2.08 a = 50° (CH) 2 2.303 Socket across corners Socket depth, short lengths Socket…

View full datasheet →