M6 Cone Point Set Screw, ISO 4027
With no head, the M6 cone point set screw (ISO 4027) sits flush or below the surface, turned with a 3 mm hex key. It comes in 8 lengths from 6 to 30 mm, each as simplified and threaded STEP.

How these parts are made, and what the levels mean: read the method
- Also known as: M6 cone point grub screw, M6 grub screw, M6 socket set screw, M6 x 6 to M6 x 30
- Model id:
iso4027-m6
- Standard: ISO 4027:2003 · thread M6 × 1, ISO metric coarse, right hand
Lengths
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| P | Thread pitch | | 1 | | 1 | nominal | L1 |
| s | Socket width across flats | 3.02 | 3 | 3.08 | 3.05 | midpoint of min–max | L1 |
| e | Socket width across corners | 3.443 | | | 3.443 | single limit (min), modeled at the limit | L1 |
| t_short | Socket depth, short screws | 2 | | | 2 | single limit (min), modeled at the limit | L1 |
| t_long | Socket depth, long screws | 3.5 | | | 3.5 | single limit (min), modeled at the limit | L1 |
| dp | Point diameter, flat and dog point | 3.7 | | 4 | 3.85 | midpoint of min–max | L1 |
| dt | Truncation diameter, cone point | | | 1.5 | 1.5 | single limit (max), modeled at the limit | L1 |
| dz | Cup diameter, cup point | 2.75 | | 3 | 2.875 | midpoint of min–max | L1 |
| z_short | Dog length, short dog point | 1.5 | | 1.75 | 1.625 | midpoint of min–max | L1 |
| z_long | Dog length, long dog point | 3 | | 3.25 | 3.125 | midpoint of min–max | L1 |
| fl_angle | Flat point chamfer angle | | | 50 | 50 | single limit (max), modeled at the limit | L2 |
| cone_angle | Cone point included angle, long lengths | | 90 | | 90 | nominal | L2 |
| cone_angle_short | Cone point included angle, short lengths | | 120 | | 120 | nominal | L1 |
| dog_angle | Dog point chamfer angle | | | 50 | 50 | single limit (max), modeled at the limit | L2 |
| cp_angle | Cup point outer chamfer angle | | | 50 | 50 | single limit (max), modeled at the limit | L2 |
| cup_angle | Cup recess included angle | | 120 ref | | 120 | reference value | L2 |
| P | Coarse thread pitch | | 1 | | 1 | nominal | L1 |
| tap_drill | Tap drill diameter | | 5 | | 5 | nominal | L1 |
| d1 | Basic minor diameter | | 4.917468 | | 4.917468 | nominal | L1 |
| ch_angle | Chamfered end angle | | | 50 | 50 | single limit (max), modeled at the limit | L2 |
| dh_fine | Clearance hole, fine series | | 6.4 | | 6.4 | nominal | L1 |
| dh_medium | Clearance hole, medium series | | 6.6 | | 6.6 | nominal | L1 |
| dh_coarse | Clearance hole, coarse series | | 7 | | 7 | nominal | L1 |
Thread and holes
- Tap drill: 5 mm (method: d − P), L1, sources amesweb-tap-drill, rule-tap-drill.
- Clearance hole (ISO 273): close 6.4, normal 6.6, loose 7 mm (L1: fine, medium and coarse series (albany-clearance, wikipedia-de-clearance)).
Drawing

As a PDF: CC-ISO4027-SZ-M6.pdf.
Goes with the M6 cone point set screw
- Hex key: 3 mm, the socket's nominal width across flats (s) in the table above.
The M6 cone point set screw beside the M5 and the M8
The M6 is number 6, counting from the smallest, of the 7 ISO 4027 cone point set screws published here, from M2 to M8.
- Thread pitch (P): 1 mm on the M6 cone point set screw, against 0.8 mm on the M5 and 1.25 mm on the M8.
- Socket width across flats (s): 3 mm on the M6 cone point set screw, against 2.5 mm on the M5 and 4 mm on the M8.
- Socket width across corners (e): at least 3.443 mm on the M6 cone point set screw, against at least 2.873 mm on the M5 and at least 4.583 mm on the M8.
- Socket depth, short screws (t_short): at least 2 mm on the M6 cone point set screw, against at least 2 mm on the M5 and at least 3 mm on the M8.
- Socket depth, long screws (t_long): at least 3.5 mm on the M6 cone point set screw, against at least 3 mm on the M5 and at least 5 mm on the M8.
- Point diameter, flat and dog point (dp): 3.7 to 4 mm on the M6 cone point set screw, against 3.2 to 3.5 mm on the M5 and 5.2 to 5.5 mm on the M8.
- Truncation diameter, cone point (dt): up to 1.5 mm on the M6 cone point set screw, against up to 1.25 mm on the M5 and up to 2 mm on the M8.
- Cup diameter, cup point (dz): 2.75 to 3 mm on the M6 cone point set screw, against 2.25 to 2.5 mm on the M5 and 4.7 to 5 mm on the M8.
Other sizes
Conventions
- Simplified: plain body at the nominal diameter, light for assemblies. Threaded: the ISO 68-1 thread, for close-ups and renders.
- Values given only as a limit are modeled at that limit; s at the middle of its band.
- Socket end: ISO 4753 chamfered end (CH), end face at the thread root d1, chamfer at the angle limit to the axis.
Documents
Sources
accu-iso4027, albany-clearance, amesweb-iso4026-4029, amesweb-tap-drill, fasten-it-iso4026, fasten-it-iso4027, fasten-it-iso4028, fasten-it-iso4029, fuller-iso4026, fuller-iso4027, fuller-iso4028, fuller-iso4029, iso4753-2011-sample, iso4753-2011-sample-text, rule-basic-minor, rule-tap-drill, wikipedia-de-clearance, wikipedia-iso261. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...