2.5 mm Taper Pin, ISO 2339
This page has 13 lengths from 10 to 35 mm, each as simplified STEP of the 2.5 mm taper pin (ISO 2339).

How these parts are made, and what the levels mean: read the method
- Also known as: 2.5 mm tapered pin, 2.5 mm conical pin, 2.5 mm tapered dowel pin, 2.5 mm x 10 to 2.5 mm x 35
- Model id:
iso2339-d2-5
- Standard: ISO 2339:1986 · size 2.5 mm
Lengths
| Length (mm) | Part key | Simplified |
|---|
| 10 | iso2339-d2-5x10 | STEP |
| 12 | iso2339-d2-5x12 | STEP |
| 14 | iso2339-d2-5x14 | STEP |
| 16 | iso2339-d2-5x16 | STEP |
| 18 | iso2339-d2-5x18 | STEP |
| 20 | iso2339-d2-5x20 | STEP |
| 22 | iso2339-d2-5x22 | STEP |
| 24 | iso2339-d2-5x24 | STEP |
| 26 | iso2339-d2-5x26 | STEP |
| 28 | iso2339-d2-5x28 | STEP |
| 30 | iso2339-d2-5x30 | STEP |
| 32 | iso2339-d2-5x32 | STEP |
| 35 | iso2339-d2-5x35 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Small-end diameter, nominal | 2.46 | 2.5 | 2.5 | 2.5 | nominal | L1 |
| a | End dome length | | 0.3 ref | | 0.3 | reference value | L1 |
| taper | Taper (1:x) | | 50 | | 50 | nominal | L1 |
Drawing

As a PDF: CC-ISO2339-SZ-2.5.pdf.
The 2.5 mm taper pin beside the 2 mm and the 3 mm
The 2.5 mm is number 2, counting from the smallest, of the 7 ISO 2339 taper pins published here, from 2 mm to 8 mm.
- Small-end diameter, nominal (d): 2.5 mm on the 2.5 mm taper pin, against 2 mm on the 2 mm and 3 mm on the 3 mm.
- End dome length (a): 0.3 mm (reference) on the 2.5 mm taper pin, against 0.25 mm (reference) on the 2 mm and 0.4 mm (reference) on the 3 mm.
- Taper (1:x) (taper): 50 mm on the 2.5 mm taper pin, the same on the 2 mm and the 3 mm.
Other sizes
Conventions
- Simplified only: a pin has no thread, so there is one detail level. STEP AP214, millimetres, Z up, the small-end tip at the origin, the large end at Z = l.
- d is the small-end diameter at its nominal (h10 puts the band below it), where the small-end dome meets the cone; the large end is d + l / 50, the makers' formula.
Documents
Sources
boltport-iso2339, fasten-it-din-en-22339, fasten-it-iso2339, minibearings-taper-pins, pts-taper-pins. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...