M8 Large Flat Washer, DIN 9021
The M8 large flat washer (DIN 9021) is 2 mm thick, with an 8.4 mm hole and an outside diameter of 24 mm. It sits under M8 screw heads and nuts; here as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: M8 fender washer, M8 penny washer, M8 wide plain washer
- Model id:
din9021-m8
- Standard: DIN 9021:1990 · size M8
Files
| Part key | Simplified |
|---|
din9021-m8 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d1 | Inside diameter | | 8.4 | 8.62 | 8.4 | nominal | L1 |
| d2 | Outside diameter | 23.48 | 24 | | 24 | nominal | L1 |
| h | Thickness | 1.8 | 2 | 2.2 | 2 | nominal | L1 |
Drawing

As a PDF: CC-DIN9021-SZ-M8.pdf.
Goes with the M8 large flat washer
The M8 large flat washer beside the M6
The M8 is the largest of the 6 DIN 9021 large flat washers published here, from M2.5 to M8.
- Inside diameter (d1): 8.4 mm on the M8 large flat washer, against 6.4 mm on the M6.
- Outside diameter (d2): 24 mm on the M8 large flat washer, against 18 mm on the M6.
- Thickness (h): 2 mm on the M8 large flat washer, against 1.6 mm on the M6.
Other sizes
Conventions
- Simplified only: a washer has no thread, so there is one detail level. STEP AP214, millimetres, Z up, one face at Z = 0.
- Hole d1 and outside d2 at their nominals, which the standard puts at d1 min and d2 max; thickness h at its nominal.
Documents
Sources
fasten-it-din9021, fasteners-eu-din9021, jcfasteners-din9021. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...