Made for M8 screws, this serrated lock washer (DIN 6798, form J, internal teeth) has an 8.4 mm hole and is 15 mm across, 0.8 mm thick. It has 10 teeth. Download it as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: M8 tooth lock washer, M8 star washer
- Model id:
din6798-j-m8
- Standard: DIN 6798:1988 · size M8
Files
| Part key | Simplified |
|---|
din6798-j-m8 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d1 | Inside diameter | 8.4 | 8.4 | 8.62 | 8.4 | nominal | L1 |
| d2 | Outside diameter, forms A and J | 14.57 | 15 | 15 | 15 | nominal | L1 |
| s1 | Sheet thickness, forms A and J | | 0.8 | | 0.8 | nominal | L1 |
| teeth_J | Number of teeth, form J | 10 | | | 10 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-DIN6798-SZ-M8.pdf.
Goes with the M8 serrated lock washer
The M8 is the largest of the 7 DIN 6798 serrated lock washers published here, from M2 to M8.
- Inside diameter (d1): 8.4 mm on the M8 form J serrated lock washer, against 6.4 mm on the M6.
- Outside diameter (d2): 15 mm on the M8 form J serrated lock washer, against 11 mm on the M6.
- Sheet thickness (s1): 0.8 mm on the M8 form J serrated lock washer, against 0.7 mm on the M6.
- Number of teeth (teeth_J): at least 10 on the M8 form J serrated lock washer, against at least 9 on the M6.
Other sizes
Conventions
- Simplified only: a washer has no thread, so there is one detail level. STEP AP214, millimetres, Z up, resting on Z = 0, the first tooth on +X.
- Bore d1, outside diameter d2 and sheet thickness s1 at their nominals.
- Forms A and J: each tooth turned about its radial centre line, right hand, so the envelope height is h = 3 s1, trimmed to the tooth-end circle.
Documents
Sources
bossard-bn786, engineersedge-din6798, fasten-it-din6798, globalfastener-din6798-a, globalfastener-din6798-j, globalfastener-din6798-v. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...