M3 Serrated Lock Washer, DIN 6798, Form A (External Teeth)

STEP · STL Supports CommunityCAD0 downloads
M3 Serrated Lock Washer, DIN 6798, Form A (External Teeth)
1 / 4

M3 Serrated Lock Washer, DIN 6798, Form A (External Teeth)

Made for M3 screws, this serrated lock washer (DIN 6798, form A, external teeth) has a 3.2 mm hole and is 6 mm across, 0.4 mm thick. It has 9 teeth. Download it as simplified STEP files.

M3 serrated lock washer, form A (external teeth), DIN 6798

How these parts are made, and what the levels mean: read the method

  • Also known as: M3 tooth lock washer, M3 star washer
  • Model id: din6798-a-m3
  • Standard: DIN 6798:1988 · size M3

Files

Part keySimplified
din6798-a-m3STEP

Dimensions

Dimension symbols for M3 serrated lock washers (DIN 6798)

SymbolNameminnommaxModeledRuleLevel
d1Inside diameter3.23.23.383.2nominalL1
d2Outside diameter, forms A and J5.7666nominalL1
s1Sheet thickness, forms A and J0.40.4nominalL1
teeth_ANumber of teeth, form A99single limit (min), modeled at the limitL1

Drawing

Drawing of the M3 serrated lock washer with its values (DIN 6798)

As a PDF: CC-DIN6798-SZ-M3.pdf.

Goes with the M3 serrated lock washer

The M3 form A serrated lock washer beside the M2.5 and the M4

The M3 is number 3, counting from the smallest, of the 7 DIN 6798 serrated lock washers published here, from M2 to M8.

  • Inside diameter (d1): 3.2 mm on the M3 form A serrated lock washer, against 2.7 mm on the M2.5 and 4.3 mm on the M4.
  • Outside diameter (d2): 6 mm on the M3 form A serrated lock washer, against 5.5 mm on the M2.5 and 8 mm on the M4.
  • Sheet thickness (s1): 0.4 mm on the M3 form A serrated lock washer, against 0.4 mm on the M2.5 and 0.5 mm on the M4.
  • Number of teeth (teeth_A): at least 9 on the M3 form A serrated lock washer, against at least 9 on the M2.5 and at least 11 on the M4.

The M3 form A serrated lock washer in its other forms

Other sizes

Conventions

  • Simplified only: a washer has no thread, so there is one detail level. STEP AP214, millimetres, Z up, resting on Z = 0, the first tooth on +X.
  • Bore d1, outside diameter d2 and sheet thickness s1 at their nominals.
  • Forms A and J: each tooth turned about its radial centre line, right hand, so the envelope height is h = 3 s1, trimmed to the tooth-end circle.

Documents

Sources

bossard-bn786, engineersedge-din6798, fasten-it-din6798, globalfastener-din6798-a, globalfastener-din6798-j, globalfastener-din6798-v. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-DIN6798-DS-M3.pdf

* CC-DIN6798-DS-M3 revA '?) CommunityCAD Size datasheet - M3 DIN 6798 M3 serrated lock washer Size datasheet: this size's values with their levels, conventions and sources, for its forms A, J and V. For M3 bolts and screws Part keys din6798-a-m3, din6798-j-m3, din6798-v-m3 Files 3 STEP AP214…

View full datasheet →

docs/CC-DIN6798-SZ-M3.pdf

DIN 6798 serrated lock washers, forms A, J and V, M3 Size drawing - M3 values on the views - enlarged 10:1 View from above Sym. Dimensi di Bore diameter, every form d2 Outside diameter, A and J si Sheet thickness, A and J d3 Outside diameter, V s2 Sheet thickness, V ZA Teeth, form A (min) zJ…

View full datasheet →