11 mm Internal Retaining Ring, DIN 472

STEP · STL Supports CommunityCAD0 downloads
11 mm Internal Retaining Ring, DIN 472
1 / 6

11 mm Internal Retaining Ring, DIN 472

For an 11 mm bore, grooved to 11.4 mm: the internal retaining ring (DIN 472), 1 mm thick. Download it as simplified STEP files.

11 mm internal retaining ring, DIN 472

How these parts are made, and what the levels mean: read the method

  • Also known as: 11 mm bore circlip, 11 mm internal circlip, 11 mm internal snap ring
  • Model id: din472-d11
  • Standard: DIN 472:2017 · size 11 mm

Files

Part keySimplified
din472-d11STEP

Dimensions

Dimension symbols for 11 mm internal retaining rings (DIN 472)

SymbolNameminnommaxModeledRuleLevel
sRing thickness11nominalL1
s_limRing thickness, limits0.9410.97midpoint of min–maxL0 (max: one source)
d3Free diameter11.811.8nominalL1
d3_limFree diameter, limits11.712.1611.93midpoint of min–maxL1
aLug height3.33.3single limit (max), modeled at the limitL1
bRadial width1.5 ref1.5reference valueL1
d5Plier hole diameter1.21.2single limit (min), modeled at the limitL1
d2Groove diameter11.411.4nominalL1
mGroove width1.11.1nominalL1
nGroove edge margin0.60.6single limit (min), modeled at the limitL1

Drawing

Drawing of the 11 mm internal retaining ring with its values (DIN 472)

As a PDF: CC-DIN472-SZ-11.pdf.

The 11 mm internal retaining ring beside the 10 mm and the 12 mm

The 11 mm is number 4, counting from the smallest, of the 17 DIN 472 internal retaining rings published here, from 8 mm to 25 mm.

  • Ring thickness (s): 1 mm on the 11 mm internal retaining ring, the same on the 10 mm and the 12 mm.
  • Ring thickness, limits (s_lim): 0.94 to 1 mm on the 11 mm internal retaining ring, the same on the 10 mm and the 12 mm.
  • Free diameter (d3): 11.8 mm on the 11 mm internal retaining ring, against 10.8 mm on the 10 mm and 13 mm on the 12 mm.
  • Free diameter, limits (d3_lim): 11.7 to 12.16 mm on the 11 mm internal retaining ring, against 10.7 to 11.16 mm on the 10 mm and 12.9 to 13.36 mm on the 12 mm.
  • Lug height (a): up to 3.3 mm on the 11 mm internal retaining ring, against up to 3.2 mm on the 10 mm and up to 3.4 mm on the 12 mm.
  • Radial width (b): 1.5 mm (reference) on the 11 mm internal retaining ring, against 1.4 mm (reference) on the 10 mm and 1.7 mm (reference) on the 12 mm.
  • Plier hole diameter (d5): at least 1.2 mm on the 11 mm internal retaining ring, against at least 1.2 mm on the 10 mm and at least 1.5 mm on the 12 mm.
  • Groove diameter (d2): 11.4 mm on the 11 mm internal retaining ring, against 10.4 mm on the 10 mm and 12.5 mm on the 12 mm.

Other sizes

Conventions

  • Simplified only: a ring has no thread, so there is one detail level. STEP AP214, millimetres, Z along the bore axis, one face at Z = 0, the opening on +X.
  • Thickness s and free outer diameter d3 at their nominals, the ring modeled free (unstressed); lug height a at its max and plier hole d5 at its min (single limits); radial width b at its approximate value.

Documents

Sources

fasten-it-din472, fasteners-eu-din472, hc-maschinentechnik-din472, seeger-din472. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-DIN472-DS-11.pdf

CC-DIN472-DS-11 revA Size datasheet - 11 '?) CommunityCAD DIN 472 11 internal retaining ring Size datasheet: this size's values with their levels, conventions and sources. For a1 mm bore Part key din472-d11 a | Files 1 STEP AP214 (simplified) 11, front view, 3:1 11, view from above, 2:1 Sym.…

View full datasheet →

docs/CC-DIN472-SZ-11.pdf

DIN 472 retaining ring for bores, normal type, 11mm bore Size drawing - 11 mm bore values on the views - enlarged 5:1 Sym. Dimensi Ring thickness Free diameter Lug height (max) Radial width at the back (=) b = 1.5 ref Plier hole (min) @d3 = 11.8 Groove diameter Groove width (H13) Groove edge…

View full datasheet →