AAA Battery, IEC 60086

STEP Supports CommunityCAD0 downloads
AAA Battery, IEC 60086
1 / 6

AAA Battery, IEC 60086

At 9.5 to 10.5 mm across and 43.3 to 44.5 mm long, the AAA battery (IEC 60086) is drawn here as simplified STEP files.

AAA battery, IEC 60086

How these parts are made, and what the levels mean: read the method

  • Also known as: AAA cylindrical cell, AAA primary cell
  • Model id: iec60086-aaa
  • Standard: IEC 60086 · size AAA

Files

Part keySimplified
iec60086-aaaSTEP

Dimensions

Dimension symbols for AAA batteries (IEC 60086)

SymbolNameminnommaxModeledRuleLevel
dDiameter9.510.510midpoint of min–maxL1
hOverall height43.344.543.9midpoint of min–maxL1
d_posPositive contact diameter3.83.8single limit (max), modeled at the limitL1
h_posPositive contact projection0.80.8single limit (min), modeled at the limitL1
d_negNegative contact diameter4.34.3single limit (min), modeled at the limitL1
e_negNegative contact recess0.50.5single limit (max), modeled at the limitL0 (max: one source)

Drawing

Drawing of the AAA battery with its values (IEC 60086)

As a PDF: CC-IEC60086-SZ-AAA.pdf.

From the maker's datasheet

As written on the ENERGIZER E92 datasheet (energizer-e92), the maker's typical values for one product, not the standard's limits.

  • Classification: Alkaline
  • Chemical System: Zinc-Manganese Dioxide (Zn/MnO2)
  • Designation: ANSI-24A, IEC-LR03
  • Nominal Voltage: 1.5 volts
  • Typical Weight: 11.5 grams (0.4 oz.)

The AAA battery beside the AAAA and the AA

The AAA is number 2 of the 11 IEC 60086 batteries published here, listed from AAAA to CR123A.

  • Diameter (d): 9.5 to 10.5 mm on the AAA battery, against 7.7 to 8.3 mm on the AAAA and 13.5 to 14.5 mm on the AA.
  • Overall height (h): 43.3 to 44.5 mm on the AAA battery, against 41.5 to 42.5 mm on the AAAA and 49.2 to 50.5 mm on the AA.
  • Positive contact diameter (d_pos): up to 3.8 mm on the AAA battery, against up to 3.8 mm on the AAAA and up to 5.5 mm on the AA.
  • Positive contact projection (h_pos): at least 0.8 mm on the AAA battery, against at least 0.7 mm on the AAAA and at least 1 mm on the AA.
  • Negative contact diameter (d_neg): at least 4.3 mm on the AAA battery, against at least 2.3 mm on the AAAA and at least 7 mm on the AA.
  • Negative contact recess (e_neg): up to 0.5 mm on the AAA battery, the same on the AA.

Other sizes

Conventions

  • Simplified only: four solids, the can, the wrap, the ring and the logo. STEP AP214, millimetres, Z along the axis, negative end at Z = 0, positive end toward +Z.
  • No IEC 60086 edition is read: each size is the envelope of the makers' datasheets (Energizer, VARTA, Duracell), one lineage per maker.
  • Disagreeing limits take the widest band the makers allow; a limit only one maker states is left open and the other bound is modeled as a single limit.

Documents

Sources

energizer-e92, varta-4003. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-IEC60086-DS-AAA.pdf

CC-IEC60086-DS-AAA rev A Size datasheet - AAA '?) CommunityCAD AAA battery Size datasheet: this size's values with their levels, conventions and sources. Envelope 10 x 43.9 mm (modeled) Part key iec60086-aaa Files 1 STEP AP214 (simplified) AAA, side, 0.5:1 AAA, from above, 2:1 Sym. Dimension Value…

View full datasheet →

docs/CC-IEC60086-SZ-AAA.pdf

IEC 60086 cylindrical primary battery, AAA Size drawing - AAA values on the views - enlarged 5:1 d_pos < 3.80 Sym. Dimension AAA 1 h_pos 2 0.80 Body diameter 10.00 qT 9.50-10.50 43.90 Overall height 43 .30-44.50 < 3.80 d_pos Positive contact diameter h_pos Positive contact height oy d_neg Negative…

View full datasheet →