ee FAIRCHILD November 1995
rel SEMICONDUCTOR m
2N7000 / 2N7002 / NDS7002A N-Channel Enhancement Mode Field Effect Transistor
General Description Features
These N-Channel enhancement mode field effect transistors = High density cell design for low Ro<ion)- are produced using Fairchild's proprietary, high cell density, Voltage controlled small signal switch DMOS technology. These products have been designed to . 9 9 wnen. minimize on-state resistance while provide rugged, reliable, = Rugged and reliable.
and fast switching performance. They can be used in most 5 A a applications requiring up to 400mA DC and can deliver = High saturation current capability. pulsed currents up to 2A. These products are particularly suited for low voltage, low current applications such as small servo motor control, power MOSFET gate drivers, and other switching applications.
TO-92
$OT-23 s
Absolute Maximum Ratings T, =25°C unless otherwise noted
Symbol | Parameter 2N7000 2N7002 NDS7002A Units Voss Drain-Source Voltage 60 V Vocr Drain-Gate Voltage (Rg, <1MQ) 60 v Voss Gate-Source Voltage - Continuous +40 V - Non Repetitive (tp <50ys) +40 I Maximum Drain Current - Continuous 200 115 280 mA - Pulsed 500 800 1500 Py Maximum P ower Dissipation 400 200 300 mw Derated above 25°C 3.2 1.6 2.4 mWw/°C TT 516 Operating and Storage Temperature Range -55 to 150 -65 to 150 °C T, Maximum Lead Temperature for Soldering 300 °C Purposes, 1/16" from Case for 10 Seconds THERMAL CHARACTERISTICS Roa Thermal Resistance, J unction-to-Ambient 312.5 625 417 °C/W
© 1997 Fairchild Semiconductor Corporation 2N7000.SAM Rev. Al
---
Electrical Characteristics T, =25°C unless otherwise noted
Symbol | Parameter Conditions Type Min | Typ | Max | Units OFF CHARACTERISTICS BV oss Drain-Source Breakdown Voltage |V,, =0V,1,=10 yA All 60 V loss Zero Gate Voltage Drain Current |V,, =48V,V.,=0V 2N7000 1 yA T,=125°C 1 mA Vos =60 V, Veg =0V 2N7002 1 HA T,=125°C NDS7002A 0.5 | mA losse Gate - Body Leakage, Forward Ves =15 V, V5, =O V 2N7000 10 nA Veg =20 V, Vo =0V 2N7002 100 | nA NDS7002A losse Gate - Body Leakage, Reverse Vos =-15 V, Vog =O V 2N7000 -10 nA Veg =-20 V, Vog =0V 2N7002 -100 | nA NDS7002A
ON CHARACTERISTICS (Note 1)
Vosithy Gate Threshold Voltage Vo5 =Vegr lp =1 MA 2N7000 0.8 2.1 3 V Vos =Vesr lp =250 PA 2N7002 1 2.1 | 2.5 NDS7002A Rosiony Static Drain-Source On-Resistance|V,, =10 V, 1, =500 mA 2N7000 1.2 5 Q T, =125°C 19 | 9 Veg =4.5 V, |p =75 mA 18 | 53 Ves =10 V, Ip =500 mA 2N7002 1.2 | 7.5 T, =100°C 17 | 13.5 Veg =5.0 V, |, =50 mA 17 | 75 T, =100C 2.4 | 13.5 Ves =10V, |) =500 mA NDS7002A 1.2 2 T, =125°C 2 | 35 Veg =5.0 V, |, =50 mA 17 3 T, =125°C 28 | 5 Vosion) Drain-Source On-Voltage Ves =10V, 1, =500 mA 2N7000 0.6 2.5 V Veg =4.5V, Ip =75 mA 0.14 | 0.4 Veg =10V, |, =500MA 2N7002 0.6 | 3.75 Veg =5.0V, |, =50 mA 0.09 | 1.5 Veg =10V, Ip =500MA NDS7002A 0.6 1 Veg =5.0V, |p =50 mA 0.09 | 0.15
2N7000.SAM Rev. Al
---
Electrical Characteristics T, =25°C unless otherwise noted
Symbol | Parameter Conditions Type Min | Typ | Max | Units ON CHARACTERISTICS Continued (note 1) loony On-State Drain Current Ves =4.5V, Vog =10V 2N7000 75 600 mA Veg =10V, Vos > 2 Vosion) 2N7002 | 500 | 2700 Ves =10V, Vos > 2 Vosion) NDS7002A ] 500 | 2700 Ors Forward Transconductance Vy, =10V, 1, =200 mA 2N7000 100 | 320 mS Vos > 2 Vosiony tp =200 mA 2nN7002 | 80 | 320 Vos > 2 Vostonyr fp =200 mA NDS7002A] 80 | 320 DYNAMIC CHARACTERISTICS Cig Input Capacitance Vo5 =25V, Veg =0V, All 20 50 pF Coss Output Capacitance f =1.0 MHz All 11 | 25 pF C..5 Reverse Transfer Capacitance All 4 5 pF ton Turn-On Time Vop = 15 V, R, =25Q, 2N7000 10 ns 1, =500 mA, Vg, =10 V, Roen =25 Voy = 30 V, R, = 150 Q, 2N700 20 1, =200 MA, Veg =10 V, NDS7002A Reey =25Q torr Turn-Off Time Vop = 15 V, R, =25Q, 2N7000 10 ns 1, =500 mA, Vg, =10 V, Reen =25 Vop =30V, R, =150Q, 2N700 20 1, =200 MA, Veg =10 V, NDS7002A Reey =25Q DRAIN-SOURCE DIODE CHARACTERISTICS AND MAXIMUM RATINGS I, Maximum Continuous Drain-Source Diode Forward Current 2N7002 115 mA NDS7002A 280 long Maximum Pulsed Drain-Source Diode Forward Current 2N7002 0.8 A NDS7002A 15 Vp Drain-Source Diode Forward Veg =OV, 15 =115 MA ote 1) 2N7002 0.88 | 1.5 V Voltage Vee =0V, 1p =400 MA «ote 2) NDS7002A 0.88 | 12
Note: 1. Pulse Test: P'
ulse Width <300ys, Duty Cycle < 2.0%.
2N7000.SAM Rev. Al
---
Typical Electrical Characteristics
Ros (on) » NORMALIZED DRAIN-SOURCE ON-RESISTANCE 2. © oS
Vesey” | | |
°
2N7000 / 2N7002 / NDS7002A 2 51s G1 3 2 £05 & zz) 0
Vpgs » DRAIN-SOURCE VOLTAGE (V)
Figure 1. On-Region Characteristics
T T Ves =10V gh7s Ip =500mA z oF N 2 15 5 g¢ S 6 1.25 ew Ze 8% fz S 0.75 6 0.5 -50 25 0 25 50 75 100 125 150
J, JUNCTION TEMPERATURE (°C)
Figure 3. On-Resistance Variation with Temperature
T =1 Ty =-55°C
Ds
°
, DRAIN CURRENT (A)
'b °
0 2 4 6 8 10
Vg» GATE TO SOURCE VOLTAGE (V)
Figure 5. Transfer Characteristics
Ros(on)» NORMALIZED DRAIN-SOURCE ON-RESISTANCE
Ven, NORMALIZED GATE-SOURCE THRESHOLD VOLTAGE
0.4 0.8 12 16 2 Ip , DRAIN CURRENT (A)
Figure 2. On-Resistance Variation with Gate Voltage and Drain Current
2.5
y = 125°C
15
25°C
-55°C 0.5
0 0.4 0.8 1.2 1.6 2 Ip, DRAIN CURRENT (A)
Figure 4. On-Resistance Variation with Drain Current and Temperature
io
a
-25 0 25 50 75 T, JUNCTION TEM PERATURE (°C)
100 «125 «150
Figure 6. Gate Threshold Variation with Temperature
2N7000.SAM Rev. Al
---
Typical Electrical Characteristics (continued)
2N7000 / 2N7002 /NDS7002A
11 . w ly =250HA 2 1.075 2 q2 105 28 = 8 1025 g Qe 2 ge} Er =u @ £ 0.975 5 a Z 0.95 gz 6 0.925 -50 25 0 25 50 75 100 125 150 qT , )]UNCTION TEMPERATURE (°C) Figure 7. Breakdown Voltage Variation with Temperature 60 40 iss _ 20 T z S Coss g 10 Z é G <5 g [Ciss 6 3 f=1MHz Ves =0V 1 | | 1 2 3 5 10 20 30 50 Vps_» DRAIN TO SOURCE VOLTAGE (V) Figure 9. Capacitance Characteristics VIN Ds Vout
DUT
Figure 11.
T
1 Ves =0V os E FA cd Ty = 125°C Soa 3 25°C Zz <= 0.05 ° 3 “55°C 6 w 2 = 0.01 rf @ 0.005
0.001 02 04 06 08 1 12 14
Vsp , BODY DIODE FORWARD VOLTAGE (V)
Figure 8. Body Diode Forward Voltage Variation with
10
, GATE-SOURCE VOLTAGE (V)
280mA
Ves
115mA
0 0.4 08 12 16 2 Qg , GATE CHARGE (nC)
Figure 10. Gate Charge Characteristics
ta(on) >]
Output, Vout
Input, Vin
10%
Pulse Width
Figure 12. Switching Waveforms
2N7000.SAM Rev. Al
---
Typical Electrical Characteristics (continued)
3 3 2 2 40, 1 1 1 Pus | 210, 7 r = Se zg Cus A z 05 hers ms | sO Ei 2 i 7 2 Oa Fa t t bs Fd Fa 0, & 2 3 oon log."s 3 01 9m 5 2 tls zZ 3 0.05 vo tov —_ S 0.05 00, cc] os = Io. a o — F Qs Ves =10V Is ° emote vet TS * SINGLE PULSE os 001 A See 0.01 T, = 25°C c 0.005 i 0.005 t — i 1 2 5 10 20 30 60 80 1 2 5 10 20 30 60 80 Vps » DRAIN-SOURCE VOLTAGE (V) Vps DRAIN-SOURCE VOLTAGE (V) Figure 13. 2N7000 Maximum Figure 14. 2N7002 Maximum Safe Operating Area Safe Operating Area 3 2 Le yO 2 1 Lost = es = Ss < 05 - FA = Fa a7 E ms 01 z : 2007 2 0.05 F= ' s & Ves =10V qs 5 SINGLE PULSE 10s ° c Ty = 25°C 0.01 A iS 0.005 1 2 5 10 20 30 60 80
Vps , DRAIN-SOURCE VOLTAGE (V)
Figure 15. NDS7000A Maximum Safe Operating Area
1 =
w w Z 0.5 D=05 26 z oa Raa =r) * Ra, Ee 02 0.2 Raa =(See Datasheet) wo 82 o1 = } 4 26 i iepeses P(pk) q $= 0.05 =HEHt 1 | & & 0.05 + beat te 4 22 0.02 i i -ty = 4 ey [ec A T-Ty =P * Ray | = 0.01 . =P *
0.02 — Single Pulse Ts QA |
& Duty Cycle, D =t, /h
0.01 1 | | tt titit l 0.0001 0.001 0.01 01 1 10 100 300 t), TIME (sec) Figure 16. TO-92, 2N7000 Transient Thermal Response Curve 1
3 05 o=05 w 28 oe! i ; 0.2 ip oe | + Rgatar0 * Raq ey 0.1 Rot Raa = (See Datasheet) 3 uo + q a = 0.05 R=0.05 S Nz f 4 4 35 0.02 +4 Pipk) Zz: a ZF L 0.01 v te! § 5 0.01 rel 4 at Single Pulse 5 ¥2 T-Ta =P *Rgald
0.002 Duty Cycle, D =t, /t
0.001 1 [ft ttt itih l 0.0001 0.001 0.01 0.1 1 10 100 300
ty, TIME (sec) Figure 17. SOT-23, 2N7002 / NDS7002A Transient Thermal Response Curve
2N7000.SAM Rev. Al
---
TO-92 Tape and Reel Data and Package Dimensions
TO-92 Packaging Configuration: Figure 1.0
TAPE and REEL OPTION See Fig 2.0 for various Reeling Styles
=)
5 Reels per Intermediate Box
FSCINT Label sample
F63TNR Label sample
F63TNR Label
aVK7418019
Customized Label
SPEC REV:
CPN: ies (F63aTNR)3|
TO-92 TNR/AMMO PACKING INFROMATION AMMO PACK OPTION
* See Fig 3.0 for 2 Ammo Packing | Style | Quantity | EOL code Pack Options Reel A 2,000 26z E 2,000 D27z Ammo M 2,000 Daz P 2,000 DISZ Unit weight Reel weight with components ‘Ammo weight with components Max quantity per intermediate box =: 5 Ammo boxes per Intermediate Box
F63TNR Label
Customized Label
(TO-92) BULK PACKING INFORMATION
BULK OPTION
cm DESCRIPTION EEADCLP 1 quantity Fee Bulk Packing
jisz_ | To8 oPtioN sto woweao cue | 20K/B0x
yosz | 105 oPrion sto woweao cue | 45K/B0x ESCINT Label NoEOL | TO.s2 STANDARD woweaocue | 20K/80x
an
=)
2000 units per E070 box for std option
530mm x 130mm x 83mm
Custor Intermediate box st
Label
FSCINT Label
10,000 units maxi per intermediate
for std option
el FAIRCHILD Le
SEMICONDUCTOR m
FSCINT Label
Customized Label
FSCINT Label
Customized Label
Anti-static jubble Sheets
mm x 102mm x 51mm Immediate Box
5 E070 boxes per intermediate Box
mized
mum box
September 1999, Rev. B
---
TO-92 Tape and Reel Data and Package Dimensions, continued
TO-92 Reeling Style Configuration: Figure 2.0
Style “A”, D26Z, D70Z (s/h)
TO-92 Radial Ammo Packaging Configuration: Figure 3.0
FIRST WIRE OFF IS COLLECTOR ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON TOP.
FIRST WIRE OFF IS EMITTER (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON BOTTOM
Style “E”, D27Z, D71Z (s/h)
FIRST WIRE OFF IS EMITTER ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON BOTTOM
FIRST WIRE OFF IS COLLECTOR (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON TOP
September 1999, Rev. B
---
TO-92 Tape and Reel Data and Package Dimensions, continued
TO-92 Tape and Reel Taping Dimension Configuration: Figure 4.0
ITEM DESCRIPTION
Base of Package to Lead Bend ComponentHeight
Lead Clinch Height Component Base Height
Component Alignment ( side/side ) Component Alignment {frontiback } Component itch
Feed Hole Pitch
Hole Centerto First Lead
Hole Center to Component Center Lead Spread
Lead Thickness
Cut Lead Length
Taped Lead Length
Taped Lead Thickness Camier Tape Thickness
Carer Tape Width
Hold - down Tape Width
Hold - down Tape position
TO-92 Reel Configuration: Figure 5.0
Feed Hole Position Sprocket Hole Diameter Lead Spring Out
T Note : All dimensions are in inches. AG Da pi ITEM DESCRIPTION resTNt Reel Diameter Arbor Hole Diameter (Standard) Customi (Small Hole) Core Diameter Hub Recess Inner Diameter ee 2 Hub Recess Depth t Flange to Flange Inner Width wi Hub to Hub Center Width we } ws Note: All dimensions are inches D3
SYMBOL
Ha HO HL Pd Hd
PO Pl P2 FLF2
u
a
wo
wi
w2 Do
SYSMBOL MINIMUM
D1 D2 D2 D3 ba wa we w3
13.975 1.160 0.650 3.100 2.700 0.370 1.630
DIMENSION
0.098 (max) 0.928 (+/- 0.025) 0.630 (+/- 0.020) 0.748 (+/- 0.020) 0.040 (max)
0.031 (max) 0.500 (+/- 0.020) 0.500 (+/- 0.008) 0.150 (40.009, -0.010) 0.247 (4/- 0.007) 0.104 (+/- 0.010) 0.018 (40.002, -0.003) 0.429 (max)
0.209 (40.051, -0.052) 0.032 (+/- 0.006) 0.021 (+ 0.006) 0.708 (40.020, -0.019), 0.236 (4/- 0.012) 0.035 (max) 0.360 (+/- 0.025) 0.157 (40.008, -0.007) 0.004 (max)
MAXIMUM
14.025 1.200 0.700 3.300 3.100 0.570 1.690 2.090
July 1999, Rev. A
---
TO-92 Tape and Reel Data and Package Dimensions
TO-92 (FS PKG Code 92, 94, 96)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in: inches [millimeters]
Part Weight per unit (gram): 0.1977
foto) BA GN INTo)
ou
TO-92 (92,9
2] 92 96
“le]rle]rle]r EJoj;elof{sBls
2/B/si[c]scfelo
3{/c{c[B]sfclc
J anuary 2000, Rev. B
---
SOT-23 Tape and Reel Data and Package Dimensions = FAIRCHILD Pd SOT-23 Packaging SEMICONDUCTOR m Configuration: Figure 10 Customized Lael Packaging Description:
SOT-23 parts are shipped in tape. The carrier tape is made from a dissipatve (carbon filled) polycarbonate resin, The cover tape is a multilayer film (Heat Activated ‘Adhesive in nature) primarily composed of polyester film, adhesive layer, sealart, and arti-static sprayed agent. ‘These reded pats in stardard option are shipped with 3,000 units per 7" or 177m diameter reel. The reels are ark blue in color ard is made of pdystyrene plastic (anti- statc coated. Other option comes in 10000 units per 13" or 330cm diameter reel. This and some other options are described in the Packaging Information table.
‘These full reds are individualy labeled ard placed inside a gandard intermedate made of recyclable corrugated brown paper with aFairchild logo printing. One pizza box contains eight reels maximum. And thew intemedate boxes are placed inside a labeled shipping box which comes in different sizes depending on be number of pats
Human Readable Embossed shipped. Label CarrierTape
Antistatic Cover Tape
SOT-23 Packaging Information m - standard Packaging Option hao fiow coda | 872 . . . Packagingtype TNR TNR SOT-23 Unit Orientation Qty per Reel/Tube/Bag 3,000 110,000 Reel Size 7 Dia 13 Box Dimension (mm) 187x107x183 | 343x343x64 Max qty per Box 24,000 30,000 bor ‘Weight per unit (gm) 0.0082 0.0082 Intermedate ‘Weight per Reel (kg) 0.1175 0.4006 Note/Comments,
Human Readabk Label sample
FAInGHILD SEmrcenoneres +
one” ANTIsS TALC:
pogn22e
Human readable Label
SOT-23 Tape Leader and Trailer Intermeda Configuration: Figure 20
Wo
Carrier Tape
Components \¢ ial Trailer Tape Leader Tape
300nm minimumor 500mm minimum or
75 empty pockets 125 empty pockets
Cover Tape
September 1999, Rev. C
---
SOT-23 Tape and Reel Data and Package Dimensions, continued
SOT-23 Embossed Carrier Tape Configuration: Figure 3.0
eT
F w { E2 " “ @ @ @ © | ) oh Te -+—P1—4 -—Ao—| -—+kO User Direction of Feed Dimensions are in millimeter Pkg type AO BO w Do DL E1 E2 F PL PO ko T We Te SOT-23 3.15 2.17 8.0 1.55 1.125 175 6.25 350 4.0 4.0 1.30 0.228 5.2 0.06 (8mm) 0.10 | 4-010 | +03 | +-0.05 | 40125 | 40.10 | min 4-005 | #01 | 4-01 | #010 | #-0.013 | 4-03 #-0.02 Notes: AO, BO, and KO dimensions are determined with respect to the EIA/J edec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). 0.5mm +, 20 deg maximum maximum "| | typical T ‘component cavity 0.5mm Bo center line maximum 20 deg maximum component rotation , Typical Sketch A (Side or F ront Sectional View) |, ___* J component Sketch C (Top View) 7) centerline
Component Rotation
Component lateral movement
Sketch B (Top View)
SOT-23 Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub 7 Dim A) Max DimA t ~ max --F~ je>||W3 Di A 13" Diameter Option W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Tape Size onten DimA | DimB Dim c DimD | Dimn Dim W1 Dim w2 | Dim W3(LSL-USL) amm bia 7.00 0.059 512 +0.020/-0.008 0.795 2.165 0.331 40.059/-0.000 0.567 0.311 - 0.429 1778 1s 13-40.5/-0.2 20.2 55 8.4 +1.5/0 4 79-109 amm 13*Dia 13.00 0.059 512 +0.020/-0.008 0.795 4.00 0.331 40.059/-0.000 0.567 0.311 - 0.429 330 1s 13-40.5/-0.2 20.2 100 8.4 +1.5/0 4 79-109
September 1999, Rev. C
---
SOT-23 Tape and Reel Data and Package Dimensions, continued
SOT-23 (FS PKG Code 49)
Scale 1:1 on letter size paper
Dimensions shown below are in: inches [millimeters]
Part Weight per unit (gram): 0.0082
}+——+t_0.0750+0.0050 [1.91+0.13] PKG
3 0.0510+0.0040 [1.30£0.10] if
8 [2 3129-48 0.0300 [0 a 0.0900 [2.29]
+0.00° 0.091048-68 ao |
eu
J 0.0160+0.0025 [0.41+0.06]TYP.
f+}-0.0375 [0.95]
0,0300 [0.76]--+]
8.8780 [835 JH f+ 0.0375+0,0025 [0.95+0.06] LAND_ PATTERN RECOMMENDATION
88438 [533 | }+_—++-0.1150+0.0050 [2.92+0.13] [ (9.0365 [0.93]
[ 0050+0.0020 [0.13+0.05]TYP.
FD io ms rt 0.0040 [0.10 | 0.0005 [382 re. 0,020049-8948 [osntgag]re. CONTROLLING DIMENSION |S_INCH SOT 25, 3 LEADS LOW PROFILE
VALUES IN [ ] ARE MILLIMETERS:
NOTE : UNLESS OTHERWISE SPECIFIED
1. STANDARD LEAD FINISH 150 MICROINCHES / 3.81 MICROMETERS MINIMUM TIN / LEAD (SOLDER) ON ALLOY 42
2. REFERENCE JEDEC REGISTRATION TO—236, VARIATION AB, ISSUE G, DATED JUL 1993
September 1998, Rev. Al
---
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACEx™ ISOPLANAR™ CoolFET™ MICROWIRE™ CROSSVOLT™ POP™ E2?CMOS™ PowerTrench FACT™ QFET™
FACT Quiet Series™ qs™
FAST® Quiet Series™ FASTr™ SuperSOT™ -3 GTOo™ SuperS OT™ -6 HiSec™ SuperSOT™ -8
DISCLAIMER
SyncFET™ TinyLogic™ UHC™ vcx™
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status
Definition
Formative or In Design
Advance Information
Preliminary First Production
No Identification Needed Full Production
Obsolete Not In Production
is datasheet contains the design specifications for product development. Specifications may change in any manner without notice.
is datasheet contains preliminary data, and upplementary data will be published at a later date. airchild Semiconductor reserves the right to make anges at any time without notice in order to improve esign.
is datasheet contains final specifications. Fairchild emiconductor reserves the right to make changes at any time without notice in order to improve design.
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. D